If your BMW NFRM is locked after short circuit, you need to reset short circuit counter in order for the headlight to work. This can be done with BMW Ediabas coding software.

Tools needed:
BMW ISTA-D ISTA-P Rheingold Tool32
BMW ICOM emulator

Or you can download free Ediabas/INPA/WinKFP/NCS Expert Tool32 software on search engines and load it on cheap WIFI BMW ICOM A2+B+C

Instructions:
ⅠThis one uses the FRM module (e.g 2011 335xi with nav) and ToolSet32…

1) Make sure it’s on map 0
2) Load INPA software and make sure the cable is working
3) Close INPA (very important to do this)
4) launch TOOL32.EXE
5) click on “jobs” and start typing out: steuern_reset_kurzshlussabschaltung
6) click on the text box located under arguements and enter the various hex values (you will need to try both check marked and unchecked for the box that says DATA). Press F5 or double click on the job name to send each command one by one
a) arguement = 0x0 (received error result)
b) 0x1 (received error result)
c) 0x2 (received error result)
d) 0x3 (received error result)
e) 0x4 (received error result)
f) 0x5 (received error result)
g) 0x6 (received error result)
h) 0x7 (received error result)
i) 0x8 (received error result)
j) 0x9 (received error result)
k) 0xa (received error result)
l) 0xb (Got my first OKAY, and started to jump up and down with joy)
7) went back to the job for reading the counter and instead of showing 50… it was now 1
8) closed TOOL32.EXE and open INPA
9) cleared all errors in the FRM
10) start my car and enjoyed seeing my driver side AE alive again
ⅡLM (or LM2) module to unlock the short circuit flag with Tool32:

Well, luckily for you this is a very simple process using the rather awesome ‘Tool32’ program, which is provided as part of the BMW Standard Toolset. First things first, you’ll need the following: A laptop with a working installation of INPA and Tool32; An OBD2 cable that works with INPA and your E46 or E39; Your VIN; An E46 M3 or an E39 M5.

Tool32 4.0.3 -CANdriver 2.5.0.0. Below list the free download link collect form internet,if you find the link is invalid,pls tell me. How to Install BMW Tools including INPA, NCS Exper, WinKFP, Tool32 and more using BimmerGeeks Standard Tools & K+D CAN Cable on a Windows 10 Laptop.

Procedure: (translated from German)
When LM1 provides the reading of short circuit status as follows (job name and PRG file in bold:
apiJob (“LM_AHL”, “status_lampen_kurzschluss”, “”, “”)

Rate: 0
OBJECT = lm_ahl
SAETZE = 1
JOBNAME = status_lampen_kurzschluss
VARIATION = LM_AHL
JOB STATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Set: 1
JOB_STATUS = OKAY
STAT_FL_LINKS_SHORT_CIRCUIT = 0 00 00 .
STAT_FL_RECHTS_SHORT_CIRCUIT = 0 00 00 .
STAT_AL_LINKS_SHORT_CIRCUIT = 0 00 00 .
STAT_AL_RECHTS_SHORT_CIRCUIT = 1 00 00 .
STAT_BEGRL_LINKS_SHORT_CIRCUIT = 0 00 00 .
STAT_BEGRL_RECHTS_SHORT_CIRCUIT = 0 00 00 .
STAT_NSW_LINKS_SHORT_CIRCUIT = 0 00 00 .
etc …

“0” means Channel OK, “1” means short circuit. Channel numbers are easily counted from top to bottom, starting with “Channel 0” (!).
In Ex. Above, it is therefore of the channel 3.

Select the command to reset the lock now, which resets the counter.
apiJob (“LM_60”, “reset_kurzschluss_sperre”, “”, “”)

Rate: 0
OBJECT = lm_60
SAETZE = 1
JOBNAME = reset_kurzschluss_sperre
VARIATION = LM_60
JOB STATUS =
UBATTCURRENT = -1
UBATTHISTORY = -1
IGNITIONCURRENT = -1
IGNITIONHISTORY = -1
Set: 1
JOB_STATUS = ERROR_LAMP_NR

With no entry in the “argument” field is the “ERROR_LAMP_NR”, ie channel number. Enter data and execute, the job status is “okay”. Re-reading the counter should then show on the channel “0”.
Each channel must be individually reset all channels at once is not possible.

When LM2 the command for resetting is “_reset_kurzschluss_sperre”

BMW INPA Software Download Work With INPA Cable

BMW INPA software new update, BMW INPA Cable with BMW INPA Software for BMW E serial programming.here eobdtool.com share full BMW INPA software 5.0.6 download BMW INPA software for F and E series models. BMW INPA Software 5.0.6 do not test, pls try it for INPA cable by your own risk.

BMW INPA software download, free:

BMW Standard Tools and INPA 5.0.6 Download Link

https://mega.nz/#F!atxDATqT!r6SO9Wu75GuDJmpbTTO48Q (unknown security)

BMW INPA software 5.0.2

Bmw Standard Tools 2019

http://bit.ly/2uUCLhJ (tested without issues, safe to use)

Gratis ebook dale carnegie bahasa indonesia inggris bahasa. BMW INPA Software Download Compatible Hardware: BMW INPA K+DCAN Interface

How to installed the BMW INPA Software?

BMW Standard Tools 2.12 – Install First

• Includes (EDIABAS v.7.30, Tool32 v.4.03, BMW INPA Software v.5.06, WinKFP v.5.31 & NCS Expert v.4.01).

INPA_Fxx_v.2 – Install Second

• Copy INPA_Fxx_v.2 folder to C:EC-AppsINPA_Fxx_v.2 and EDIABAS to C:EDIABAS overriding existing EDIABAS Folder.
• Run INPALOAD.exe from INPA_Fxx_v.2 BIN folder (C:EC-AppsINPA_Fxx_v.2BININPALOAD.exe).
• Note: DISABLE WINDOWS FIREWALL ANY ANY VIRUS SOFTWARE.
• Note: For Exx connection, you will need to change EDIABAS.ini file to “INTERFACE = STD:OBD” and edit OBD.ini Com Port settings accordingly to match you PC’s Com Port settings.

Tool32 Download

Note: BMW INPA software 5.0.6 for INPA Cablefrom customer share at cartechnology.co.uk, thanks for customer share, TRY ON YOUR OWN RISK!

Tool32 Download

For further questions about BMW INPA software for BMW INPA Cable BMW INPA K+DCAN Interface with INPA Software Download, don’t hesitate to contact us.

Focus On OBD Tool Since 2008

Follow Us:www.facebook.com/groups/vxdas

Bmw Tool 32

Skype:eobdtool02

Wechat/WhatsApp:(+86)13728823411

Inpa Tool32 Download

Email:[email protected]

Tool32 Download Deutsch

Website:www.vxdas.com